PRODUCTS

EN8 Carbon Steel Bar

EN8 Carbon Steel Bar

EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. It is normally supplied in cold-drawn or as-rolled conditions. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.

EN9 Carbon Steel Square Bar

EN9 Carbon Steel Square Bar

EN9 carbon steel is a medium carbon steel grade commonly supplied in the as-rolled condition. It can be flame or induction hardened to produce a high surface hardness with excellent wear resistance for a carbon steel grade.

12L14 Cold Drawn Steel Bar

12L14 Cold Drawn Steel Bar

12L14 is a type of American standard lead - sulfur free - cutting structural steel (Automatic Steel). Alloyed elements in free-cutting steel like Se, lead can reduce cutting resistance and improve the finish and precision of machined parts.

C10100 Copper Bar

C10100 Copper Bar

C10100 Oxygen-Free Electronic Copper, also known as OFE, is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment.

C10200 Copper Bar

C10200 Copper Bar

The purity of TU2 / C10200 oxygen free reaches 99.95%, the oxygen content is not more than 0.005%, and the total impurity content is not more than 0.05%. TU2/ C10200 oxygen-free copper has excellent cold and hot processing performance.

C11000 Copper Bar

C11000 Copper Bar

C11000 Electrolytic Tough Pitch (ETP) Copper is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware.

C12200 Copper Bar

C12200 Copper Bar

General Description C12200, Phosphorus deoxidised copper, has been made weldable and brazeable by deoxidising with phosphorus. It is widely used as flat products and tubing, especially where it is to be welded or brazed.

C12000 Copper Bar

C12000 Copper Bar

UNS C12000 copper has 95% IACS conductivity, low residual phosphorus, and high embrittlement resistance. It has a good electrical conductivity and excellent welding and soldering properties. It can be formed excellent, either hot or cold.

C27000 Brass Bar

C27000 Brass Bar

Yellow brass UNS C27000 is commonly referred to as copper-zinc brass. UNS C27000 shows excellent cold working properties which make it ideal for machining. Architects prefer brass for their shaping ability and colour. Brass is recycled efficiently and proves economical.

< 1...121314...39 >

Questions?

Contact our specialist

sales03@yegangsteel.com

Get expert sales advice within 12 hours.

+86 13165103602

Chat with us now for a quick response.

+86 13165103602

Wechat number

Contact us now to get a free quote or estimate.

Submit Message →

Copyright ©

Powered by CEGglobal  |  SEO | Privacy policy

【 Business license】