PRODUCTS

C27000 Brass Coil

C27000 Brass Coil

Yellow brass UNS C27000 is commonly referred to as copper-zinc brass. UNS C27000 shows excellent cold working properties which make it ideal for machining. Architects prefer brass for their shaping ability and colour. Brass is recycled efficiently and proves economical.

Lead Brass Coil

Lead Brass Coil

Lead increases the machinability of brass as well as increasing its strength and resistance to corrosion. The addition of lead also seals shrinkage pores to provide pressure tightness. Brasses can contain up to 3.5 percent in lead contents, and are classified as low, medium, or high-leaded.

Single Reduced Cold Rolled Tinplate Coil

Single Reduced Cold Rolled Tinplate Coil

Single reduced product is cold rolled to the finished gauge, then continuously annealed and coated with a thin layer of tin.

Double Reduced Cold Rolled Tinplate Coil

Double Reduced Cold Rolled Tinplate Coil

Double reduced product is given a partial cold reduction to reach an intermediate gauge, then annealed and given another cold reduction to the final gauge prior to coating with tin. The resulting product is stiffer, harder, and stronger than single reduced, in some cases, allowing customers to utilize lighter gauge steel in their application.

Electrolytic Tinplate (ETP) Coil

Electrolytic Tinplate (ETP) Coil

ETP (Electrolytic Tinplate). Low carbon steel coated with tin with a layer between them of steel-tin alloy and destined to be used mainly in the production of metal cans. Tin provides good weldability and electrical conductivity, as well as high corrosion resistance.

Tin Free Steel (TFS) Coil

Tin Free Steel (TFS) Coil

Tin Free Steel (TFS) is produced by applying electrolytic chromic acid treatment over steel sheets. This steel product was developed to meet economic requirements, and excels tinplate in paintability, paint adhesion, and economy. It is widely used for making beverage cans and 18-liter cans.

Equal Thickness Tinplate Coil

Equal Thickness Tinplate Coil

Equal thickness tinplate is a cold-rolled tinplate with the same amount of tin plating on both sides. Tin plated sheet is made by rolling low carbon steel, followed by acid washing, cold rolling, electrolytic cleaning annealing, leveling, edge cutting processing, and then cleaning, electroplating, softening, passivation treatment, and oil coating before cutting into finished tin plated sheet metal.

Differential Thickness Tinplate Coil

Differential Thickness Tinplate Coil

Differential thickness tinplate is a cold-rolled electroplated tin plate with different tin plating amounts on both sides. Tin plated sheet is made by rolling low carbon steel, followed by acid washing, cold rolling, electrolytic cleaning annealing, leveling, edge cutting processing, and then cleaning, electroplating, softening, passivation treatment, and oil coating before cutting into finished tin plated sheet metal.

Tin Mill Black Plate (TMBP)

Tin Mill Black Plate (TMBP)

Tin Mill Black Plate (TMBP) steel is manufactured from hot rolled coils by pickling to remove the surface oxide produced during the hot rolling stage, and cold reducing through a cold mill to the desired thickness. TMBP produces a low ductility product that is usually processed further to develop desired end use characteristics.

< 1234...8 >

Questions?

Contact our specialist

sales88@yegangsteel.com

Get expert sales advice within 12 hours.

+86-19353123227

Chat with us now for a quick response.

+86 19353123227

Wechat number

Contact us now to get a free quote or estimate.

Submit Message →

Copyright ©

Powered by CEGglobal  |  SEO | Privacy policy

【 Business license】