PRODUCTS

External Tooth Lock/Flat/Inner Tooth Lock/Spring Washer

External Tooth Lock/Flat/Inner Tooth Lock/Spring Washer

A washer is a loophole (usually in the middle) of a thin sheet (usually round) that is usually used to distribute the load to thread fasteners. Other uses are as spacers, springs (Belleville gaskets, wave gaskets), wear pads, pre-display devices, locking devices.

Stainless Steel/Carbon Steel/Alloy Reducer

Stainless Steel/Carbon Steel/Alloy Reducer

Concentric reducer is a kind of fitting that be used for reducing piping size. Concentric reducer is most commonly used and often eccentric reducer used in piping in about pump and pipe rack area.</br> Eccentric reducer is most commonly used and often eccentric reducer used in piping in about pump and pipe rack area.</br> These reducers are used in various applications that involved in high pressure, vibration & temperature. These reducers are widely used in chemical, petroleum, shipbuilding, gas, power sectors.

Stainless Steel/Carbon Steel/Alloy Tee

Stainless Steel/Carbon Steel/Alloy Tee

Tee is also known as tee or tee pipe fittings, tee joints, etc. Mainly used to change the direction of the fluid, used in the main pipe to branch pipe. Can be classified by pipe size. Generally made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, pvc and other materials.

Stainless Steel/Carbon Steel/Alloy Elbow

Stainless Steel/Carbon Steel/Alloy Elbow

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Stainless Steel/Carbon Steel/Alloy Flange

Stainless Steel/Carbon Steel/Alloy Flange

The flange is a part connected between the pipe and the pipe, which is used for the connection between the pipe ends; It is also useful in the flange on the import and export of the equipment for the connection between two devices, such as the reducer flange. Flange connection or flange joint refers to a detachable connection which is connected by flanges, gaskets and bolts as a group of combined sealing structures.

Grain Orientation (GO) Silicon Steel

Grain Orientation (GO) Silicon Steel

Silicon steel is divided into oriented silicon steel, non-oriented silicon steel these two categories. The magnetic properties of oriented silicon steel are strongly directional, with the lowest iron loss and the highest magnetic permeability in the rolling direction and high magnetic inductance in a certain magnetizing field. The silicon content of oriented silicon steel is about 3%, and requires that the oxide inclusion content in the steel is low, and must contain a certain inhibitor (MnS, A1N), because it is used for transformer core manufacturing, so it is also called cold-rolled transformer steel.

Non-oriented (NGO) Silicon Steel

Non-oriented (NGO) Silicon Steel

Silicon steel is divided into oriented silicon steel, non-oriented silicon steel these two categories. The magnetic properties of oriented silicon steel are strongly directional, with the lowest iron loss and the highest magnetic permeability in the rolling direction and high magnetic inductance in a certain magnetizing field. The silicon content of oriented silicon steel is about 3%, and requires that the oxide inclusion content in the steel is low, and must contain a certain inhibitor (MnS, A1N), because it is used for transformer core manufacturing, so it is also called cold-rolled transformer steel.

Conventional Grain Oriented (RGO) Silicon Steel

Conventional Grain Oriented (RGO) Silicon Steel

Silicon steel is divided into oriented silicon steel, non-oriented silicon steel these two categories. The magnetic properties of oriented silicon steel are strongly directional, with the lowest iron loss and the highest magnetic permeability in the rolling direction and high magnetic inductance in a certain magnetizing field. The silicon content of oriented silicon steel is about 3%, and requires that the oxide inclusion content in the steel is low, and must contain a certain inhibitor (MnS, A1N), because it is used for transformer core manufacturing, so it is also called cold-rolled transformer steel.

High Permeability Grain Orientation (HGO) Silicon Steel

High Permeability Grain Orientation (HGO) Silicon Steel

Silicon steel is divided into oriented silicon steel, non-oriented silicon steel these two categories. The magnetic properties of oriented silicon steel are strongly directional, with the lowest iron loss and the highest magnetic permeability in the rolling direction and high magnetic inductance in a certain magnetizing field. The silicon content of oriented silicon steel is about 3%, and requires that the oxide inclusion content in the steel is low, and must contain a certain inhibitor (MnS, A1N), because it is used for transformer core manufacturing, so it is also called cold-rolled transformer steel.

< 1...282930...44 >

Questions?

Contact our specialist

sales03@yegangsteel.com

Get expert sales advice within 12 hours.

+86 13165103602

Chat with us now for a quick response.

+86 13165103602

Wechat number

Contact us now to get a free quote or estimate.

Submit Message →

Copyright ©

Powered by CEGglobal  |  SEO | Privacy policy

【 Business license】